Were you previously meeting your goals with the same setup, or have you been struggling since you started using the system? This distinction helps determine whether you need to troubleshoot a recent change or take a closer look at settings and expectations that may not have been quite right from the start.
If you’ve been looping successfully but your glucose levels are running higher or lower than your goals today, or over the past few days, there are several things worth reviewing to distinguish a bad day from a new pattern. One unusual day may reflect food, activity, stress, illness, or a site issue. A persistent change deserves a more systematic review.
Look at the whole picture, not just time in range. Review the glucose trace, insulin delivery, meals, activity, and the timing of highs and lows together. Time in range tells you that something has changed, but often not why.
Do not assume the solution is to adjust settings. First, rule out sensor issues, pump communication problems, insulin delivery issues, and changes in circumstances. Settings changes made to compensate for a failing site, for example, can create problems once the site is replaced.
First, remember the basics
- Basal rates should keep your glucose level in the absence of food or exercise.
- Insulin Sensitivity Factor is how far your glucose level would drop with 1 U of insulin with correct basal rates in the absence of food or exercise while glucose is stable.
- Carb Ratio is how many grams of carbs are covered by 1 U of insulin, where glucose might rise after eating but at the end of 3 or 4 hours should return to baseline.
If the above are in order,
1. Check your tech
- Is your CGM accurate and updating? Check for missing data, sensor problems, compression lows, or readings that don’t match how you feel. Confirm with a fingerstick here and there.
- Is your Automated Insulin Delivery (AID) system communicating with your pump? Look for communication errors, missed or delayed commands, unexpected pump status, or gaps in insulin delivery. Check to be sure Bluetooth is turned on.
- Is insulin actually being delivered? Check the infusion site or pod, cannula, tubing if applicable, insulin age and condition, and any signs of leakage or site failure. Consider whether a site needs to be changed.
- Is there enough insulin on board, and does the history make sense? Review recent boluses, basal delivery, corrections, and any unexpected interruptions. Make sure the insulin delivery history matches what you intended.
2. Look at what has changed
- Are you sick, fighting an infection, stressed, sleeping poorly, or experiencing hormonal changes?
- Has your activity level changed? Exercise can affect glucose during activity and for hours afterward.
- Have meals, snacks, timing of meals, or carbohydrate amounts changed? Are there meals that are consistently harder to manage?
- Have your schedule, sleep patterns, travel, or daily routines changed?
- Have any medications or other factors that affect glucose changed?
- See this “42 Factors That Affect Blood Glucose” list: https://diatribe.org/diabetes-management/42-factors-affect-blood-glucose
3. Review Your AID system’s decisions
Look at the CGM graph alongside your AID system’s predictions, recommended or delivered insulin, temporary targets or overrides, and insulin-on-board information.
Ask:
- Is the system responding to rising glucose as expected?
- Is glucose rising before the system has a chance to respond, or does it remain high despite insulin delivery?
- Are lows following corrections, meals, exercise, or periods of increased insulin delivery?
- Are there repeated patterns at particular times of day?
- Are temporary targets, overrides, or other temporary settings still appropriate and ending when expected?
Remember that your AID system responds to the information it receives. It cannot overcome every problem with insulin absorption, inaccurate inputs, interrupted delivery, or changing insulin needs.
4. Revisit settings only after reviewing the evidence
If the pattern is recurring for multiple days, review whether your programmed basal rates, insulin-to-carb ratios, correction factors, duration of insulin action, and other relevant settings still reflect your needs. Consider whether a setting is contributing to a consistent pattern rather than reacting to one difficult day.
Review changes with an experienced, knowledgeable clinician or educator when possible. Avoid making multiple changes at once, and evaluate patterns over time rather than chasing individual readings.
Remember: Troubleshooting steps may differ depending on the algorithm, version, pump, and CGM in use. Specific advice depends on the person’s actual setup, as different systems have different features and troubleshooting options.
5. Know when to act promptly
Persistent high glucose can indicate a delivery problem, including a failed pod or infusion site.
- Check for signs of a site or delivery problem:
- Do you smell insulin or see or feel wetness near the cannula?
- Can you see that the cannula is displaced?
- Follow your established diabetes sick-day and pump-failure plan.
- Check ketones when indicated.
- If insulin delivery failure is suspected, use your prescribed backup insulin plan.
- If ketones are significant:
- Follow your established ketone-management plan to get insulin into your system and hydrate.
- Monitor ketones to see whether they are decreasing.
- If ketones do not improve with treatment, seek urgent medical guidance.
- Seek immediate emergency medical care for vomiting, difficulty breathing, or other signs of diabetic ketoacidosis (DKA).
Frequent or severe lows also warrant prompt attention. The three-day rule does not apply when there is evidence of increased insulin sensitivity. Treat hypoglycemia according to your established plan.
